Sales of Off-Highway Trucks Is A2 Coursework

Open, View, and/or
Download this Document

Total Length: 1302 words ( 4 double-spaced pages)

Total Sources: 6

Page 1 of 4

When fully loaded the weight distribution is 40% on the front axle and 60% on the rear axle. Given the likely adhesion conditions, the powertrain will drive all axles.

Suspension geometry design and assessment

Steering design

Turning circle

When the vehicle is cornering, each wheel must go through a turning circle. The outer turning circle, is to our main subject of interest. This calculation is never precise because when a vehicle is cornering the perpendiculars via the centres of all wheels never intersect at the curve centre point (Ackermann condition). Additionally, while the vehicle is moving, certain dynamic forces will always arise that will eventually affect the cornering manoeuvre (MAN,2000).

The formula used.

Vehicle Model T31, 19.314 FC

Wheelbase lkt = 5000 mm

Front axle Model V9-82L

Tyres 315/80 R. 22.5

Wheel 22.5 x 9.00

Track width s = 2058 mm

Scrub radius r0 = 58 mm

Inner steer angle ?i = 50.0°

Outer steer angle ?a = 30°30' = 30.5°

1. Distance between steering axes

Calculations 17 lkt

Outer turning circle j js a0 I r0

r0 r0

TDB-172

j = s - 2r0 = 2058-2 58

j = 1942

Therefore

Theoretical value for outer steer angle

3. Steering deviation

4. Turning circle radius

Axle load calculation

Performing an axle load calculation

To optimise the vehicle and achieve the correct superstructure ratings, an axle load calculation is essential. The body can be matched properly to the truck only if the vehicle is weighed before any body building work is carried out. The weights obtained in the weighing process are to be included in the axle load calculation. The following section will explain an axle load calculation. The moment theorem is used to distribute the weight of the equipment to the front and rear axles.

Stuck Writing Your "Sales of Off-Highway Trucks Is" A2 Coursework?

View All Our Example Sales of Off-Highway Trucks Is A2 Coursework

Have A Custom Example Essay Written

All distances are with respect to the theoretical front axle centreline.

Weight is ever used in the sense of weight force (in N) in the following formulae but in the sense

Braking and dynamics control

The braking system will comprise of the following components;

Parking/Secondary Piston

Service/Retarding Piston

Friction Discs

Steel Plates

Actuating Springs

Cooling Oil in

Cooling Oil Out

It will be used in combination with an Integrated Braking Control (IBC) system that Electronically combines Automatic Retarding Control (ARC) and system's Traction Control System (TCS) into one integrated control system like the ones used in CAT off-highway trucks (CAT,2001).As noted by Inanov et al. (2010), One of the most challenging problems in off-road vehicle dynamics control is related with development of new generation of systems that aimed at the simultaneous optimization of performance, safety, as well as mobility. The level of progress in this domain is closely associated with the fusion of driveline as well as the braking and steering control on the basis of intelligent architecture. This system has a) Multi-level architecture of integrated off-road vehicle control: Controlling systems as well as vehicle properties as intelligent agents, decision-making process.B) Fusion of control systems: Control philosophy of which is integrated electronic stability program, system's torque vectoring, as well as active front steering from viewpoint of vehicle performance and stability.

Maximum speed calculation

Vehicle Model T42, 27.414 DFAK

Tyre size 295/80 R. 22.5

Rolling circumference 3.185 m

Transmission ZF 16S151 OD

Transmission ratio in lowest gear 13.80

Transmission ratio in highest gear 0.84

Minimum engine speed at maximum engine torque 900/min

Maximum engine speed 1900/min

Ratio for transfer case VG 1700/2 in on-road applications 1.007

Ratio for.....

Show More ⇣

     Open the full completed essay and source list


OR

     Order a one-of-a-kind custom essay on this topic


sample essay writing service

Cite This Resource:

Latest APA Format (6th edition)

Copy Reference
"Sales Of Off-Highway Trucks Is" (2013, January 03) Retrieved June 5, 2026, from
https://www.aceyourpaper.com/essays/sales-off-highway-trucks-77257

Latest MLA Format (8th edition)

Copy Reference
"Sales Of Off-Highway Trucks Is" 03 January 2013. Web.5 June. 2026. <
https://www.aceyourpaper.com/essays/sales-off-highway-trucks-77257>

Latest Chicago Format (16th edition)

Copy Reference
"Sales Of Off-Highway Trucks Is", 03 January 2013, Accessed.5 June. 2026,
https://www.aceyourpaper.com/essays/sales-off-highway-trucks-77257
   

Open, View, and/or
Download this Document
order custom essay example